BRIDGEPORT SERIES I TWO HORSPOWER VERTICAL MILL IN VERY GOOD CONDITION.

EXCELLENT CHROME WAYS AND QUILL, NEWER BALLSCREWS ON BOTH X AND Y AXIS, 9 x 42 TABLE, SPIRIT DIGITAL READ OUT, ELECTRIC AUTOMATIC OILER, SMOOTH QUIET 2 HP VARIABLE SPEED HEAD, SPEED HANDLE ON THE QUILL FEED, QUICK ADJUST QUILL FEED STOP, LIGHT, COLLET RACK, RUNS ON 220/440 3 PH (PRESENTLY WIRED 440), FOUR 110v PLUGS ON THE SIDE OF THE MACHINE FOR YOUR LIGHTS, READOUT, OILER, ACCESSORIES.

NICE HANDY 5C TABLE TOP POLISHING & LAPPING LATHE WITH FOOT PEDAL AIR OPPERATED COLLET CLOSER.

A LITTLE ROUGH, BUT WITH A BIT OF WORK YOU WILL HAVE A NICE LATHE. THE MOTOR AND SPINDLE DRIVE IS GOOD, YOU COULD ADD A 3 JAW CHUCK WITH A 5C MOUNT TO THIS LATHE FOR ABOUT $100 AND BE ABLE TO HOLD AND POLISH PINS UP TO 4" DIA.

HERE IS YOUR CHANCE TO PICK UP THAT SPEED LATHE YOU'VE ALWAYS WANTED, NO MORE HOLDING UP THE  LATHE OPPERATOR JUST SO YOU CAN POLISH SOMETHING.

PRICE: $600

WE TESTED THIS UNIT BY PLUGGING IT INTO OUR B241 MITUTOYO CMM AND IT TRIGGERED NORMALLY.

PRICED NEW THESE ARE A SMALL FORTUNE SO HERE IS YOUR CHANCE TO GRAB ONE AT A FRACTION OF THE COST.

PRICE: $700

FREELAND ID OD COMPARATOR AND STAND IN GOOD CONDITION. IT HAS A TABLE THAT FLOATS SMOOTHLY ON BALL BEARINGS AND THE ELECTRONIC INDICATOR READS TO 10 MILLIONTHS RESOLUTION IN ITS SMALLEST RANGE.

This is a top quality ID OD Comparator made by Freeland Gage. To buy one of these new you would probably have to take out a mortgage. This is a fair price for a high accuracy comparator in this condition.

PRICE: $1500

14" TESA HITE GAGE IN EXCELLENT CONDITION. MADE IN SWITZERLAND BY BROWN & SHARP, THIS IS LIKE HAVING A Z AXIS CMM RIGHT ON YOUR SURFACE PLATE. IT HAS MANY HANDY FUNCTIONS THAT WILL SAVE YOU A LOT OF INSPECTION TIME. 

This is a top quality Swiss made electronic hieght gage made by Brown & Sharp. To buy one of these new you would probably have to take out a mortgage. This is a fair price for a highly accurate and very handy gage in this condition.

Price: $2000

FEDERAL GAGE BLOCKS COMPARATOR IN EXCELLENT CONDITION. IT COMES WITH A CERAMIC TABLE AND THE ELECTRONIC INDICATOR READS TO 10 MILLIONTHS RESOLUTION IN ITS SMALLEST RANGE.

This is a top quality Comparator made by Federal Gage. To buy one of these new you would probably have to take out a mortgage. This is a fair price for a high accuracy comparator in this condition.

Price: $1500

Up for auction we have Bertram Vertical Turret Lathe in very good condition.

This lathe is a real workhorse of a machine. It has a 15 horsepower main motor and can turn up to 24 inches in diameter and up to 36 long. This will be a welcome addition to any tool room.

This machine was in good working order when recently taken from service. It is kept in a temperature controlled environment. It could use a good cleaning as a near by machine has been cutting plastics.

At the starting price of this auction, this is a steal for sure!

Price: $2700

CNC CONTROLLED DEA DCC CMM WITH RENISHAW MH8 PROBE HEAD, TP2 PROBE AND STYLUS KIT WITH ABOUT 18 RUBY PROBE TIPS AND ABOUT 20 EXTENSIONS AND 2 WAY, 4 WAY AND ANGLE EXTENSIONS, AND 2 CERAMIC MASTER BALLS. RECENT $10,000.00 SOFTWARE UPGRADE. IT IS PRESENTLY LOCKED DOWN AND READY FOR SHIPPING.

THIS DEA IS BEAUTIFUL, YOU WILL LOVE HOW USER FRIENDLY IT IS.

HAS BEEN VERY WELL TAKEN CARE OF. WILL SEND BOTH THE OLD AND NEW COMPUTERS AND SOFTWARE.

 DEA type 0101 S/N 70-09246, Geopak 2000 software, version 2.007, mitutoyo mag-1 multi-axis gathering unit with switch box, ibm 300cc pc control, positional accuracy: full stroke x=+/- 1.6, y= +/- 1.6, z= +/- 1.3 (inch x .0001).

Approx. travel: 26X x 26Y x 18Z.   

THIS IS AN EXCELLENT PRICE ON AN EXCELLENT CMM!

Price: $11000

CLAUSING 1500 VARIABLE SPEED ENGINE LATHE 15 X 48, IN VERY GOOD CONDITION. WE CUT MOSTLY ALUMINUM WITH THIS LATHE SO IT HASN'T BEEN OVERLY ABUSED.  THE LAST PHOTO SHOWS IT IN ACTION PEELING OFF A 1/4" CUT.

GOOD RUNNING MACHINE WITH EXCELLENT WAYS, 4 WAY TOOLPOST, D1-4 MOUNT, 6" 3 JAW CHUCK FITTED TO LATHE & 10" 3 JAW CHUCK, 3 TURNING TOOLS, LIVE CENTER, THREADING DIAL, PULL OUT CHIP PAN. PRESENTLY UNDER POWER WIRED FOR 440V. IT CAN ALSO BE WIRED FOR 220V 3 PH. IF YOU NEED TO RUN IT ON SINGLE PHASE POWER, YOU CAN GET A HEAVY DUTY STATIC PHASE CONVERTER FOR THIS LATHE FOR ABOUT $100 RIGHT HERE ON EBAY. 

Specifications:

Swing over Bed 15"; Swing over Cross-Slide 8"; Distance between Centers 48"; Spindle Speeds, Variable (2 Ranges) 45 to 2000 RPM; Spindle Mount D4 Camlock; Spindle Bore 1-3/4"; Feeds(Range) (48) .00067 to .0374; IPR Threads(Range-Inch) (48) 4 to 224 TPI; Tailstock Taper #4 Morse; Motor 220/440V 3Ph; Dimensions 89"x 32" Footprint.

Price: $3800

ELITE M600 OD/ID GRINDER IN VERY GOOD CONDITION.

INCLUDED WITH THE MACHINE ARE WHEEL MOUNT WITH GRINDING WHEEL, MOUNTED CHUCK, BALANCING ARBOR, BALANCING STAND, COOLANT PUMP AND TANK.

CAN BE SEEN UNDER POWER IN WINDSOR ONTARIO. Price: $3300.00

OKAMOTO 3 AXIS AUTOMATIC 16 X 32 SURFACE GRINDER  IN GOOD CONDITION. OKAMOTO IS TOP OF THE LINE WHEN IT COMES TO SURFACE GRINDERS, THIS IS A VERY SOLID WELL BUILT MACHINE. THIS REALLY IS A GOOD PRICE ON AN OKAMOTO THIS SIZE AND CONDITION.

 THIS GRINDER HAS AN AUTOSIZING UNIT WITH SPARK OUT CONTROL, HYDRAULIC OVER THE WHEEL DRESSER, COOLANT TANK AND PUMP, 16 X 32 ELECTROMAGNETIC CHUCK, AND  POWER ELEVATION. Price : $8,000.00