FREE SHIPPING!!!! *

For clean, crisp bends in metal roofing materials! Hand rolling a bend along the trim edge of standing-seam metal roofing or metal building panels is now easier and more precise than ever before with the model number ER3 Adjustable 3-Station Edge Roller. The ER3 quickly adjusts for making 5/8" to 4" (16 to 102 mm) bends in 29 to 22-gauge (0.36 to 0.76 mm) steel.

The center roller station features a precision English/Metric depth gauge on one shaft leg that, when locked in place at desired setting, accurately aligns the depth of all roller stations at once. Large, comfortable adjustment knobs hold the depth setting securely. The exclusive 3-statiion roller design produces a uniform bend out to the very ends of a straight panel length. Outer rollers may travel off material and easily back on to complete the bend while the remaining two roller stations stay aligned on the rolled edge. The center roller roller station is also independently adjustable, with outer roller stations retracted and locked, to allow for making mild-angled bends on a curve.

Hardened rollers with long-life bearings assure long, dependable service life.
*Free shipping to the Continental United States Only.

The Qual-Craft Shingle Shark is designed to allow for accurate and repeatable cuts at any angle, as well as lengthwise cuts for starter course used along lower edge of the roof. Versatile! Cuts any angle. Cuts any asphalt or fiberglass shingle. Cuts starter row either U.S. or Metric. Cuts material face up or face down, and from either top or bottom edge as desired. Cuts ridge cap. Cuts Lengthwise. Makes lengthwise cuts for starter row. Two offset holes - one for metric, the other for U.S. shingles. Cuts Angles Crosscut guide adjusts full 180? for any angle. Cuts face up or face down and from either the top or bottom edge. Can be set up by using a cleat to prevent slippage. Can also be set up by using a piece of 2x10 lumber and footing the tool against it, or by using a 6”x90? roof bracket.

 

The Aluminum Pump Jack System is unique, safe, durable and a dream to operate! This versatile, state-of-the-art system is perfect for the contractor who wants to promote worker speed and efficiency while providing the safest scaffolding available. The Aluminum Pump Jack System is ultra safe, easily transported, easy to set up and take down, and has a greater climbing rate per stroke for faster movement and less worker fatigue. The easily adjusted work platform can be raised or lowered to the perfect height, eliminating overreaching and uncomfortable positions. The pump jack mechanism uses a spring-loaded cam lock for smooth operation, and there’s no clutch to wear out. Wall braces (model #2002) with a swivel head to accommodate all roof pitches, and interchangeable pole anchors and bases to accommodate all ground surfaces. The System can be fitted with guardrails and a workbench that can be installed at any time during the job without removing the jacks from the poles. For extra comfort, the foot levers and hand cranks are padded, and the toe straps are big enough to accommodate large work boots.

Thank you for all of your support,