SNOWSPORT® All Terrain Plow releases new fast and easy to install front mount for Honda Rancher 420 ATV

Jamestown, ND, March 10, 2008 — ACI (Agri-Cover, Inc.), manufacturer of the SNOWSPORT® All Terrain Plow, announces the release of their new fast and easy to install front mount for the 2008 Honda Rancher 420 ATV. The SNOWSPORT® All Terrain Plow and included mount installs on your all terrain vehicle in minutes and completely removes in seconds. The plow does not require any wiring, lever controls, or winch to operate, making plowing fast and efficient.

The SNOWSPORT® All Terrain Plow is manufactured from corrosion-resistant, hardened, anodized aluminum and is equipped with a 1" thick rubber cutting edge designed to aggressively plow hard, compacted snow, yet remains terrain-friendly.

Complete removal of the blade and mount is easy and does not require tools. All you do is pull two pins and you’re on your way in less than a minute. The SNOWSPORT® All Terrain Plow is designed for full functionality of your all terrain vehicle with little loss of ground clearance when attached.

Part# 60150 — 2008 Honda Rancher 420 ATV

Huge selection of vehicles including '08 models added to THE best downloader on the market

The introduction of the Bully Dog Triple Dog Gas downloader took the market by storm when it was released last year. The downloader is loaded with features including:

Increased horsepower & torque

Improved fuel economy

Adjustment of transmission settings

The ability to read and eliminate Diagnostic Trouble Codes

When introduced, the downloader worked on a wide variety of Dodge, Ford and GM trucks and SUVs. As with all of the Bully Dog products, the engineers have continued to develop updates. The latest update makes the Gas Triple Dog the most versatile tuner available. The downloader now works on over 50 different vehicles including 2008 models!

The First in a series of new “Beast” style Cold Air Intakes. These newly designed intakes are State-of-the-Art in every way.

This new application (part number 300-220) is a complete CAD Design system for the extremely popular 2003-2008 Dodge Ram 5.7 Hemi trucks

Features for this new application include:

A Specially Designed “LARGE” Filter With SynthaFlow Layering for maximum flow and dirt retention

A Large Deep-Breathing Cold Air Box that flows well beyond the needs of the engine

A Large Ram type inlet that will Scoop in additional outside air for added performance

20 Plus Horsepower and 22 ft/lbs of torque

Designed for Go or Tow - Can be used with large deep-breathing intake tube supplied for maximum performance or the stock inlet tube to maximize torque (and minimize sound) when towing a large load on extreme grades.

AIRAID’s No-Hassle Warranty

Will fit with the PowerAid Spacer

These units are in stock and ready to ship.

Coming Very Soon:

A New Design Cold Air Intake for the 2003-2008 Dodge Ram 4.7L Applications

Cold Air Intakes for Chevrolet Corvette C6 and Z06 Applications

Cold Air Intake for the Ford Mustang S/N 95  

Cold Air Intake for the Ford Mustang Shelby GT 500

Flowmaster - Force II™

Part #17446

2008 FORD F250/F350

Fits all wheelbases with

5.4L/6.8L (V8/V10) Engines

Exits 3.00-inch Single-Out-Side

Flowmaster’s Force II™ exhaust system is the perfect performance upgrade for your 2008 Ford F-250/F-350 series truck equipped with the V8 or V10 engine. This system fits both 2-wheel and 4-wheel drive vehicles and fits all wheelbase models. It offers an enhanced moderate performance exterior tone, that’s

become so popular on these heavy duty trucks while providing a mild interior

resonance. This system is constructed from 16-gauge aluminized steel and features a 3-inch inlet pipe, 70 Series® muffler and a single 3.00-inch mandrel bent tailpipe that exits on the passenger side behind the rear wheel. It’s finished off with a 3.50-inch stainless steel, clamp-on tip featuring a rolled

edge and embossed Flowmaster logo. This system is the perfect addition for anyone wanting to improve the look and sound of their new Ford truck. A complete hardware package and instructions are included with this easy to install system.

Specifications:

Weight: 62lbs.

The off-road suspension experts at Rancho® have expanded the ROCKGEAR™ line of off-road Jeep® JK accessories to include off-road bumpers. The ROCKGEAR™ line of high-clearance bumpers is designed specifically for the Rock Crawling enthusiast, at an affordable price. Available for both the front and rear is a versatile no-nonsense bolt-on design. Bolt-on the performance and protection your JK needs to conquer the most demanding terrain with Rancho® ROCKGEAR™.

Front Off-Road Bumper- Part Number RS6220B

2007-08 JK Wrangler, Rubicon and Unlimited 3/16” steel construction

Compact design provides maximum approach angle Accommodates most standard-sized winches Black powder-coated textured finish

Rear Off-Road Bumper, with tire carrier - Part Number RS6221B

2007-08 JK Wrangler, Rubicon and Unlimited

3/16” steel construction

Compact design provides maximum departure angle

Accommodates up to a 37” spare tire

Black powder-coated textured finish

K&N’s lifetime replacement air filters are designed to increase horsepower and acceleration while providing excellent filtration. We make over 1,200 different replacement air filters for virtually every vehicle on the road. These filters are custom designed to fit into your existing factory air box. Their drop-in design means adding performance is simple. Simply remove the disposable air filter and replace it with a K&N; there is NEVER any cutting or fitting required. Our stock replacement air filters for street vehicles are covered by our famous K&N Million-Mile Limited Warranty™ and will be THE LAST AIR FILTER YOUR VEHICLE WILL EVER NEED.

E-0784 Product Specifications

• Product Style: Unique Air Filters
• Filter Re-Oiling Amount: 5.9 oz (174 ml)
• Height: 7 in (178 mm)
• Length: 11 in (279 mm)
• Width: 9.75 in (248 mm)
• Weight: 3.8 lb (1.7 kg)

CONVENIENT AND COMPACT STORAGE

Westin’s universal Truck-Pal tailgate ladder is designed to get you into your truck’s bed safely! It’s convenient and compact storage allows you to maximize available space when not in use. It is quickly and easily mounted. For use, (Step 1) open tailgate and unlatch Truck-Pal, (Step 2) lift Truck-Pal upright, (Step 3) extend by lifting up the remaining extensions (two) until fully extended and touching solid ground. The Truck-Pal is designed for use on trucks with a tailgate height of up to 38 inches.

FACTS

• Light weight extension

• Compact self storage

• Universal application

• Mountable on trucks with bed covers

• Aluminum finish - 3 Year Warranty

SPECIFICATION:

Material: 6005A-T6 Alloy Aluminum

Finish: Aluminum

Mounting: Self-tapping screws - Driver bit required

Warranty: 3-YEAR

Features for this new application include:

• A Specially Designed Filter With SynthaFlow Layering for maximum flow and dirt retention
• 7 Plus Horsepower and 7 ft/lbs of torque
• Application Specific installs in minutes with simple hand tools
• AIRAID’s No-Hassle Warranty
• Will fit with the PowerAid Spacer

As with all AIRMAIL releases, these units are in stock and ready to ship.

Coming Very Soon:

A New Design Cold Air Intake for the 2003-2008 Dodge Ram 5.7 Hemi Applications

Cold Air Intake for the Ford Mustang S/N 95  

Cold Air Intakes for Chevrolet Corvette C6 and Z06 Applications

Cold Air Intake for the Ford Mustang Shelby GT 500

Tuner Features:

Stock Tune: with adjustable speed limiters. Speed limiter to approximately 120 MPH varies based on vehicle set-up weight, tire size, 2wd vs. 4wd, etc.

40 RWHP & 100-ft/lb TQ:

Tow Tune, made specifically for towing. DiabloSport recommended weight limitations based on manufacturer suggested limits for the vehicle.

65 RWHP and 155-ft/lb TQ: Economy Performance Tune, designed for Economy and Performance, fuel economy depends solely on driving style, and will vary from vehicle to vehicle. DiabloSport recommended weight limitations of 8,000 Lbs.

100+ RWHP and 198-ft/lb TQ: Performance Tune, designed specifically for high performance functions. DiabloSport recommends this tune not be used for towing.

P/N: U7165

http://powerandplay.com/

MagnaFlow's Performance D.P.F. Series Diesel Systems is its premium line which includes mandrel-bent stainless steel tubing, a mirror finish 100% stainless steel muffler, an optional muffler delete pipe, band clamps, and polished MagnaFlow single-wall inter-cooled tips.

  * MagnaFlow Performance with a Lifetime Warranty

  * OEM-Style Barbed Hangers

  * Giant Polished Stainless Steel Single-Wall Inter-Cooled Tip

You can expect significant gains in horsepower, torque, improved fuel economy and a lower EGT (exhaust gas temperature).

P/N: 16974

http://powerandplay.com/

* Replacement Installation, All Models

* Installs in 1.5 hours with Simple hand tools

* Proudly Made in the USA with American Milled Material.

* Features Monster Bar TM for a Bold Look

* Best Fit possible while still maintaining OEM appearance

  and brand identity.

P/N: 44272

http://powerandplay.com/

Provides 3/4" of tire coverage

No-Drill application process makes installation a breeze

100% UV protection

No chalking, cracking, or warping

Dura-Flex material gives maximum durability and flexibility

Paintable OEM matte black finish

Limited Lifetime Warranty

P/N: 20919-02

http://powerandplay.com/

* Keeps water, snow, and dust out of your truck bed

* Works with tonneaus, toppers, or lids

* Keep your cargo clean & dry

* Quick and easy to install

* Fits 07-08 Chevy/GMC new body trucks

P/N: 60090

http://powerandplay.com/

Features:

-First programmer to read and display EGTs, probe included

-In-cab display monitors vital engine functions such as RPMs and MPH

-Additional 85hp and 200 ft./lbs. of torque

-4 power levels with special mileage tune for improved fuel economy

-Displays DPF regeneration status

-Ships with custom designed dash pod

-Displays and clears diagnostic trouble codes with full text description

-Corrects for non-stock tires to display true speed

-Displays Soot Mass and Injector Balance Rates

P/N: 25003

http://powerandplay.com/

Superlift's new Level-It systems offer economical ways to eliminate the factory nose-down rake on late-model trucks and SUVs.

They accommodate larger tires/plus-sized wheels, correct suspension sag or compensate for a winch or snowplow. For torsion-bar IFS trucks, Level-It kits use replacement Torsion Keys that provide 1.5"-2.5" of adjustable lift, fitting up to 35" tires on some applications.

Made from forged steel, the Torsion Keys are 25% stronger than OE and are indexed to provide lift without increasing torsion-bar pre-load. Torsion-bar Level-It kits include any necessary adjusting bolts (to prevent "over-cranking" the bars) and shock extensions to accomplish the job in about two hours. Applications are available for 1999-2008 4WD and 2WD Chevy/GMC 1500, 1997-2008 Ford F-150 4WD and 2002-2008 Dodge Ram 1500 4WD.

P/N: 40009 ('99-'07 Chevy/GMC 1500 2WD)

        40008 ('99-'07 Chevy/GMC 1500 4WD)

        400012 ('07-'08 Chevy/GMC 1500 2WD/4WD)

        40005 ('97-'04 Ford F150 4WD)

        40006 ('04-'08 Ford F150 2WD/4WD)

        40001 ('02-'05 Dodge Ram 1500 4WD)

        40002 ('06-'08 Dodge Ram 1500 4WD)

http://powerandplay.com/

AirAid has released a  new cold air Intake System for the '07-'08 Chevy Trailblazer SS and  GMC Envoy 5.3L & 6.0L.

This system is designed to deliver serious horsepower and torque at a great price. It features the reusable SynthaFlow High-Flow Filtration System, which increases engine

Efficiency and drivability.

P/N: 200-206

http://powerandplay.com/

• Manufactured from 6" tall diamond tread aircraft grade aluminum for heavy duty use
• Allows full space between wheel wells
• Notched to be used in conjunction with the EZ-Retriever

http://powerandplay.com/

Westin introduces the all-new Polished Stainless Steel Sportsman Grille Guard for the '07-'08 Chevy Silverado 1500LD & the '08 Ford F250/350/450/550HD Superduty.

The Sportsman is manufactured from polished 304 stainless steel tubing (for added strength and maximum rust protection) and features a fully welded 1-piece center section contoured to fit vehicle specific applications. Pre-drilled holes on the center cross-bar allow for easy installation of Westin's optional driving lights. The Sportsman bolts on quick and easy and is backed by Westin's Lifetime Warranty.

P/N: 45-2270 ('07-'08 Chevy Silverado 1500LD)

        45-2360 ('08 Ford 250/350/450/500HD Superduty)

http://powerandplay.com/

Built for performance and show utilizing the highest quality components, the K&N 77 Series High-Flow Performance Kit is a free-flowing mandrel-bent aluminum tube induction system designed for Trucks and Sport Utility Vehicles. 77-Series intakes have a polished aluminum finish. K&N intake systems replace your vehicle's restrictive factory air filter and air intake housing. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your vehicle's engine to inhale a larger volume of air than the OEM air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. The filters on these kits are washable and reusable. Most of our intake kits are relatively easy to install using tools commonly available (see installation instructions).

77-9031KP Product Specifications

Product Style: 77 Series Kits

Estimated Horsepower Gain: 13.43 HP @ 5142 RPM

Color: Polished

Replacement Filter: RF-1041

CARB Exempt: No

Weight: 13.4 lb (6.1 kg)

http://powerandplay.com/truck_accessories_parts/K_and_N_77-9031KP/